No products in the cart.
Mobile Holder
1–16 of 37 Results
-
The RAM-B-252U marine-grade aluminum ball base consists of a 1" rubber ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles by attaching to the mirror frame. The main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).1 colorRAM 11mm Bolt Head Adapter Ball Base
1,250 EGP -
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.1 color
RAM Composite Double Socket Arm – B Size Medium
1,100 EGP -
The RAP-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 2.42", this is the lowest profile RAM® double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.1 color
RAM Composite Double Socket Arm – B Size Short
950 EGP -
Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of .5".
Assembly Guide
1 colorRAM Handlebar U-Bolt Base for Rails 0.5″ to 1.25″ in Diameter – B Size
1,800 EGP -
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycles. We include the hardware you need to mount to the fill port as well.
Assembly Guide
1 colorRAM Large Gas Tank Ball Base for Motorcycles
2,600 EGP -
The RAM-B-309-1U attaches to your motorcycle's handlebar clutch/brake clamp and features one B size 1" rubber ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base is compatible with your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The hole centers have a minimum width of 0.94" and a maximum of 1.58".
Assembly Guide
1 colorRAM Motorcycle Brake/Clutch Reservoir Ball Base
1,350 EGP -
The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Assembly Gude
1 colorRAM Motorcycle Brake/Clutch Reservoir Base with Add-On Ball
1,700 EGP -
The RAM® motorcycle fork stem base is one of the cleanest and most popular solutions for mounting your favorite device on the center of your bike. Featuring a B size 1" rubber ball, this part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure 12mm to 38mm (.5” to 1.49”) in diameter.
Assembly Guide
1 colorRAM Motorcycle Fork Stem Ball Base
1,900 EGP -
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the B size 1" rubber ball offset. Made of die cast aluminum with an overmolded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate that mounts above the cover using the screw holes and longer screws of the cover. The kit includes three sets of screws of differing lengths. The center two slots are 2 7/16" center to center and are just under a .5" long. This mount is not compatible with the 2016 BMW R1200RT.
Assembly Guide
1 colorRAM Offset Reservoir Cover Ball Base
2,100 EGP -
This version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of large phones and other devices. The adjustable side keepers ensure that devices like GPS units and Bluetooth speakers within the listed compatible dimensions will also fit in the holder. Included is a RAM® diamond ball base featuring a B size ball and hardware.
Assembly Guide
1 colorRAM Quick-Grip XL Phone Holder with Ball
2,700 EGP -
The RAM® Quick-Grip™ XL Phone Holder with RAM® Vibe-Safe™ Adapter & Ball (RAM-HOL-PD4-462B) is a combination of the RAM® Quick-Grip™ XL Phone Mount with Low-Profile Small RAM® Tough-Claw™ and the RAM® Vibe-Safe™—our vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and boasts the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments. The holder is compatible with handheld devices that will fit the dimensions listed below, it is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Assembly Guide
1 colorRAM Quick-Grip XL Phone Holder with Vibe-Safe Adapter & Ball
5,200 EGP -
This version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of large phones and other devices. The adjustable side keepers ensure that devices like GPS units and Bluetooth speakers within the listed compatible dimensions will also fit in the holder. Included is a medium length RAM® double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from .5” to 1.25” in diameter.
Assembly Guide
1 colorRAM Quick-Grip XL Phone Mount with Handlebar U-Bolt Base – Medium Arm
5,600 EGP -
The RAM® Quick-Grip™ XL Phone Mount with RAM® Vibe-Safe™ & U-Bolt Base - Short (RAM-B-149Z-A-PD4-462) is a combination of the RAM® Quick-Grip™ XL Phone Mount and the RAM® Vibe-Safe™—our vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and boasts the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments. This product includes one (1) short B size arm and one (1) RAM® U-Bolt Base that accomodates rails from .5" - 1.25" in diameter. The holder is compatible with handheld devices that will fit the dimensions listed below, it is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Assembly Guide
1 colorRAM Quick-Grip XL Phone Mount with Vibe-Safe & U-Bolt Base
8,200 EGP -
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycle. We include the hardware you need to mount to the fill port as well.
Assembly Guide
1 colorRAM Small Gas Tank Ball Base for Motorcycles
2,400 EGP -
The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The medium version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 1.6" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.1 color
RAM Tough-Claw Medium Clamp Base with Ball
3,750 EGP -
The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface. Complete your mount by attaching a B size RAM® double socket arm and device holder.1 color
RAM Twist-Lock Suction Cup Base with Ball
2,000 EGP
Showing
16
of
37
items