No products in the cart.
Shop
1137–1152 of 1172 Results
-
The RAM-B-309-1U attaches to your motorcycle's handlebar clutch/brake clamp and features one B size 1" rubber ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base is compatible with your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The hole centers have a minimum width of 0.94" and a maximum of 1.58".Assembly Guide
RAM Motorcycle Brake/Clutch Reservoir Ball Base
1,500 EGP -
The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".Assembly Gude
RAM Motorcycle Brake/Clutch Reservoir Base with Add-On Ball
2,500 EGP -
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycles. We include the hardware you need to mount to the fill port as well.Assembly Guide
RAM Large Gas Tank Ball Base for Motorcycles
2,600 EGP -
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycle. We include the hardware you need to mount to the fill port as well.Assembly Guide
RAM Small Gas Tank Ball Base for Motorcycles
2,400 EGP -
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the B size 1" rubber ball offset. Made of die cast aluminum with an overmolded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate that mounts above the cover using the screw holes and longer screws of the cover. The kit includes three sets of screws of differing lengths. The center two slots are 2 7/16" center to center and are just under a .5" long. This mount is not compatible with the 2016 BMW R1200RT. Assembly GuideRAM Offset Reservoir Cover Ball Base
2,200 EGP -
The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface. Complete your mount by attaching a B size RAM® double socket arm and device holder.RAM Twist-Lock Suction Cup Base with Ball
2,000 EGP -
The RAM® motorcycle fork stem base is one of the cleanest and most popular solutions for mounting your favorite device on the center of your bike. Featuring a B size 1" rubber ball, this part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure 12mm to 38mm (.5” to 1.49”) in diameter.
Assembly Guide
RAM Motorcycle Fork Stem Ball Base
1,900 EGP -
Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of .5". Assembly GuideRAM Handlebar U-Bolt Base for Rails 0.5″ to 1.25″ in Diameter – B Size
1,800 EGP -
The RAP-UN-CAP-4U consists of four black post caps that fit all versions of the RAM X-Grip®. Quick set adhesive is included to offer extra security for these rubber cap accessories.RAM X-Grip Rubber Cap 4-Pack Replacement
550 EGP -
This RAM® X-Grip® tether is new and improved to fit both the standard size (UN7) and large size (UN10) X-Grip phone holder for a stronger hold in harsh and open cockpit environments. Made of high-strength elastomeric material, this tether fits around the corners of your phone for added peace of mind on and off the road.
RAM X-Grip Tether for Phone Mounts
450 EGP -
• Small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface • Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use • Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments • Backed by a lifetime warrantyRAM X-Grip Large Phone Mount with RAM Snap-Link Tough-Claw
5,500 EGP -
The RAM-HOL-UN8B consists of a spring loaded cradle and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN8B expands and contracts for perfect fit of most 7"-8" tablets. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.RAM X-Grip Universal Holder for 7″-8″ Tablets with Ball – B Size
2,000 EGP