حامل كاميرا
12 Results
-
For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM® ball adapter for GoPro® mounting bases. Utilizing the RAM® ball and socket mounting system, simply attach the included B size 1” rubber ball adapter to the GoPro® base for enhanced adjustability and superior vibration damping – letting you get the most out of your favorite action camera.Assembly Guide
1 colorRAM Action Camera Universal Ball Adapter
1,100 EGP -
The RAM-B-252U marine-grade aluminum ball base consists of a 1" rubber ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles by attaching to the mirror frame. The main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).1 colorRAM 11mm Bolt Head Adapter Ball Base
1,250 EGP -
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.1 colorRAM Composite Double Socket Arm – B Size Medium
1,100 EGP -
The RAP-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 2.42", this is the lowest profile RAM® double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.1 colorRAM Composite Double Socket Arm – B Size Short
950 EGP -
The RAM-B-202AU, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 2.5" diameter round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.1 colorRAM Ball Adapter with Round Plate and 1/4″-20 Threaded Stud – B Size
1,500 EGP -
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycles. We include the hardware you need to mount to the fill port as well.Assembly Guide
1 colorRAM Large Gas Tank Ball Base for Motorcycles
2,600 EGP -
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycle. We include the hardware you need to mount to the fill port as well.Assembly Guide
1 colorRAM Small Gas Tank Ball Base for Motorcycles
2,400 EGP -
The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The medium version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 1.6" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.1 colorRAM Tough-Claw Medium Clamp Base with Ball
3,750 EGP -
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the B size 1" rubber ball offset. Made of die cast aluminum with an overmolded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate that mounts above the cover using the screw holes and longer screws of the cover. The kit includes three sets of screws of differing lengths. The center two slots are 2 7/16" center to center and are just under a .5" long. This mount is not compatible with the 2016 BMW R1200RT.Assembly Guide
1 colorRAM Offset Reservoir Cover Ball Base
2,100 EGP -
The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface. Complete your mount by attaching a B size RAM® double socket arm and device holder.1 colorRAM Twist-Lock Suction Cup Base with Ball
2,000 EGP -
The RAM® motorcycle fork stem base is one of the cleanest and most popular solutions for mounting your favorite device on the center of your bike. Featuring a B size 1" rubber ball, this part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure 12mm to 38mm (.5” to 1.49”) in diameter.Assembly Guide
1 colorRAM Motorcycle Fork Stem Ball Base
1,900 EGP -
Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of .5".Assembly Guide
1 colorRAM Handlebar U-Bolt Base for Rails 0.5″ to 1.25″ in Diameter – B Size
1,800 EGP
عرض
12
من
12
منتجات
